Addition of palladium and platinum tri-tert-butylphosphine groups to Re-Sn and Re-Ge bonds

The reaction of Re2(CO)8[mu-eta2-C(H)=C(H)Bu(n)](mu-H) with Ph3SnH at 68 degrees C yielded the new compound Re2(CO)8(mu-SnPh2)2 (10) which contains two SnPh2 ligands bridging two Re(CO)(4) groups, joined by an unusually long Re-Re bond. Fenske-Hall molecular orbital calculations indicate that the bonding in the Re2Sn2 cluster is dominated by strong Re-Sn interactions and that the Re-Re interactions are weak. The 119Sn M?ssbauer spectrum of 10 exhibits a doublet with an isomer shift (IS) of 1.674(12) mm s(-1) and a quadrupole splitting (QS) of 2.080(12) mm s(-1) at 90 K,characteristic of Sn(IV) in a SnA2B2 environment. The IS is temperature dependent, -1.99(14) x 10(-4) mm s(-1) K(-1); the QS is temperature independent. The temperature-dependent properties are consistent with the known Gol'danskii-Kariagin effect. The germanium compound Re2(CO)8(mu-GePh2)2 (11) was obtained from the reaction of Re2(CO)8[mu-eta2-C(H)=C(H)Bu(n)](mu-H) with Ph3GeH. Compound 11 has a structure similar to that of 10. The reaction of 10 with Pd(PBu(t)3)2 at 25 degrees C yielded the bis-Pd(PBu(t)3) adduct, Re2(CO)8(mu-SnPh2)2[Pd(PBu(t)3)]2 (12); it has two Pd(PBu(t)3) groups bridging two of the four Re-Sn bonds in 10. Fenske-Hall molecular orbital calculations show that the Pd(PBu(t)3) groups form three-center two-electron bonds with the neighboring rhenium and tin atoms. The mono- and bis-Pt(PBu(t)3) adducts, Re2(CO)8(mu-SnPh2(2)[Pt(PBu(t)3)] (13) and Re2(CO)8(mu-SnPh2)2[Pt(PBu(t)3)]2 (14), were formed when 10 was treated with Pt(PBu(t)3)2. A mono adduct of 11, Re2(CO)8(mu-GePh2)2[Pt(PBu(t)3)] (15), was obtained similarly from the reaction of 11 with Pt(PBu(t)3)2.     

The determination of134Cs,137Cs,210Pb,226Ra and228Ra concentrations in nearshore marine sediments and seawater

Multi-radionuclide analyses of coastal marine sediments and seawater can be of considerable value in defining rates and mechanisms of nearshore processes. A preliminary study of¹³⁴Cs,¹³⁷Cs,²¹⁰Pb,²²⁶Ra and²²⁸Ra in the Clyde Sea Area has been performed. A summary of the marine geochemistries of these species and a detailed account of methods involved in their routine analysis are described.     

Measurement of PCDDs, PCDFs, and non-ortho-PCBs by comprehensive two-dimensional gas chromatography-isotope dilution time-of-flight mass spectrometry (GC x GC-IDTOFMS)

Comprehensive two-dimensional gas chromatography with isotope-dilution time-of-flight mass spectrometry (GC × GC-IDTOFMS) was used to measure polychlorinated dibenzo-p-dioxin (PCDD), polychlorinated dibenzofuran (PCDF), and coplanar polychlorinated biphenyl (cPCB) concentrations in ash, sediment, vegetation, and fish samples. The GC × GC capability was achieved by using a quad jet, dual stage, thermal modulator. Zone compression of the GC peaks from modulation resulted in a significant increase of the signal intensity over classical GC-IDTOFMS. The GC × GC column set used an Rtx-Dioxin 2 phase as the first dimension (¹D) and an Rtx-500 as the second dimension (²D). The chromatographic separation of the 17 PCDD/Fs and the 4 cPCBs was attained in ¹D except for 2,3,7,8-TCDD and CB126 for which deconvoluted ion currents (DIC) were required to be reported separately. The Rtx-500 phase separated the bulk matrix interfering compounds from the target analytes in ²D. The instrumental limit of detection (iLODs) was 0.5 pg for 2,3,7,8-TCDD. The calibration curves showed good correlation coefficients for all the compounds investigated in the concentration range of 0.5–200 pg. GC × GC-IDTOFMS results compared favorably to those from conventional isotope-dilution one-dimensional gas chromatography-high resolution mass spectrometry (GC-IDHRMS). The comprehensive mass analysis of the TOFMS further permitted the identification of other contaminants of concern in the samples.     

A fully automated nanoelectrospray tandem mass spectrometric method for analysis of Caco-2 samples

Caco-2 cells offer a means to rapidly screen permeability of drug candidates, allowing pharmaceutical companies to eliminate candidates unable to cross the intestinal barrier early in the discovery process. This screening process is typically performed by conventional liquid chromatography/tandem mass spectrometry (LC/MS/MS), which can require time-consuming method development. An alternative to LC/MS/MS, automated nanoelectrospray tandem mass spectrometry (nanoESI-MS/MS), is introduced. This novel approach requires an off-line ZipTip desalting step followed by automated nanoESI-MS/MS, using the NanoMate 100 and ESI Chip. In addition to reduced method development time, automated nanoESI-MS/MS also offers no carry-over between samples, low sample consumption, and ease-of-use as compared with conventional pulled-capillary nanoelectrospray. Furthermore, the infusion system described has the potential to be high-throughput. A comparison of Caco-2 samples analyzed both by LC/MS/MS and by automated nanoESI-MS/MS is presented. The permeability and recovery data of the two compounds analyzed in this study obtained from conventional LC/MS/MS and by automated nanoESI-MS/MS were in excellent agreement.     

The development of an 18-locus Y-STR system for forensic casework

The aim of the present work was to improve the discriminatory potential, and hence the probative value, of Y-STR-based testing by extending the set of Y chromosome STR loci available for forensic casework. In accordance with the requirements of a Y chromosome multiplex analytical system developed specifically for forensic casework use, we have sought to maximize the number of loci able to be co-amplified, ensure appropriate assay sensitivity (1–2 ng of input genomic DNA), balance inter-locus signals and minimize confounding female DNA artifacts. Two Y chromosome STR systems, multiplex I (MPI) and multiplex II (MPII), have been developed which permit the robust co-amplification of 18 Y-STRs. The loci include DYS19, DYS385(a) and (b), DYS388, DYS389I and II, DYS390, DYS391, DYS392, DYS393, DYS425, DYS434, DYS437, DYS438, DYS439, Y-GATA-C4, Y-GATA-A7.1 (DYS460) and Y-GATA-H4. The two multiplex systems are robust over a wide range of primer, magnesium, and DNA polymerase concentrations and perform well under a variety of cycling conditions. Complete male haplotypes can be obtained with as little as 100–250 pg of template DNA. Although a limited number of female DNA artifacts are observed in mixed stains in which the male DNA comprises 1/100 of the total, the male profile is easily discernible. Slightly modified versions of MPI and MPII demonstrate a significant reduction in female artifacts. Thus, it may not be necessary to employ a differential extraction strategy to obtain a male haplotype (or haplotypes in the case of multiple male donors) in cases of sexual assault. The potential utility of MPI and MPII for forensic casework is exemplified by their ability to dissect out the male haplotype in post-coital vaginal swabs and to determine the number of male donors in mixed semen stains.This study has emphasized the need for novel Y-STR multiplexes developed for forensic use to undergo a series of validation exercises that go beyond simply optimizing the PCR reaction conditions. Specifically, stringent performance checks on their efficacy need to be carried out using casework-type specimens in order to determine potential confounding effects from female DNA.     

Fourier transform infrared studies of alternate acid-amine Langmuir-Blodgett films with pyroelectric properties

FTIR-RAIRS and ATR techniques are shown to provide a powerful means of investigating the molecular behaviour responsible for the pyroelectric properties of organic monolayer assemblies on silicon and aluminised glass. Spectral changes, associated with either proton transfer or head group rearrangement, are well correlated with the level of pyroelectric response for two different devices. The technique promises to be extremely important for the elucidation of the microscopic properties of molecular electronic devices.     

5-Ethoxy-3-(trichloromethyl)-1,2,4-oxadiazole

5-Ethoxy-3-(trichloromethyl)-1, 2, 4-oxadiazole (V) was synthesized to elucidate the chemistry involved in the preparation of the hitherto unreported alkoxy-1, 2, 4-oxadiazoles and to determine the effect of the isosteric replacement of sulfur by oxygen on antifungal activity. Heating the “amino-oxime” tautomer II of trichloroacetamidoxime with ethyl chloroformate furnished exclusively the O-acylated product III. The trans configuration of III accounts for its resistance to cyclize under a variety of conditions, in contrast to the general behaviour of acylated amidoximes. Pyrolysis of III at 160° yielded IV which exists in the keto form. Refluxing IV with ethyl iodide in the presence of silver oxide gave an isomeric mixture which was separated by v.p.c. to give V and VI. Compound V retained 60% of the overall activity of the corresponding sulfur analog.     

Extended Hückel MO calculations of the conformation of several amino acids

The conformation of the amino acid residues, glycine, alanine, proline, and phenylalanine have been predicted from molecular orbital calculations of appropriate model compounds. Using the current main chain rotation convention (, ) the principle conformations were found to be glycine (0, 0), alanine (240, 240), proline (120, 330) and phenylalanine (30, 330). Several secondary conformations were also found for glycine. A comparison of the predicted conformations is in good agreement with experimental data on comparable residues or model compounds.Supported by National Institutes of Health Grants No. FR 5409-07 and GM 16312-01.Recipient of a Public Health Service Research Career Development Award AM 1159-01.     

Rapid synthesis of α-ketoamides using microwave irradiation-simultaneous cooling method

Microwave-assisted acyl chloride-isonitrile condensation and CaCO₃-mediated hydrolysis constitute a one-pot, 2-minute process to prepare α-ketoamides.     

A polymorphic pocket at the P10 position contributes to peptide binding specificity in class II MHC proteins

Peptides bind to class II major histocompatibility complex (MHC) proteins in an extended conformation. Pockets in the peptide binding site spaced to accommodate peptide side chains at the P1, P4, P6, and P9 positions have been previously characterized and help to explain the obtained peptide binding specificity. However, two peptides differing only at P10 have significantly different binding affinities for HLA-DR1. The structure of HLA-DR1 in complex with the tighter binding peptide shows that the peptide binds in the usual polyproline type II conformation, but with the P10 residue accommodated in a shallow pocket at the end of the binding groove. HLA-DR1 variants with polymorphic residues at these positions were produced and found to exhibit different side chain specificity at the P10 position. These results define a new specificity position in HLA-DR proteins.